Asus ROG Swift PG27UQ: Grab It On Black Friday & Cyber Monday Sales 2021
Features & Specifications
If you’ve gotten over the sticker shock long enough to learn the specs table, then you can certainly understand why the PG27UQ is indeed expensive. It’s only the next HDR screen we’ve seen with a full-array backlight. Just like the Dell UP2718Q, it sports 384 independently addressable zones and will hit that magic 1,000-nit brightness level. In addition, it features over 90 percent of the DCI-P3 color space because of a quantum-dot film and can run at 144Hz in the event that you engage overclock. There’s a caveat there that we’ll make clear in a moment, however the panel’s native refresh rate is 120Hz–not too shabby. Get awesome black Friday deals in our website.
Get Huge Discount on Asus ROG Swift PG27UQ in Amazon (Black Friday & Cyber Monday Sales + Deals)
Compare Price in More Stores like Walmart, BestBuy, Target, NewEgg, etc
To properly drive this display, you’ll desire a GeForce GTX 1080 Ti graphics card and the most recent drivers to allow not merely the fast refresh but HDR10 support. You’ll also need the Windows 10 update from October 2017 to permit HDR. Even better, get the April 2018 update to include an HDR brightness slider to the Control Panel. It is the first screen we’ve seen that utilizes the bandwidth capacities of DisplayPort 1.4. Of course, G-Sync may be the tear-eliminating tech of preference and surprisingly, there is absolutely no ULMB (ultra low motion blur). The panel may also accept 10-bit signals though its native bit-depth continues to be 8-bits with Frame Rate Conversion (FRC).
To cement its status as reduced monitor, the PG27UQ carries a factory-certified calibration. And we are able to confirm that it not merely meets its claimed specs, but that it’s also just about the most accurate HDR displays we’ve tested. There exists a lot to see here, so let’s have a look.
Unpacking & Accessories
Like all of the products in Asus’ ROG line, the PG27UQ includes some nice extras. Multiple lenses for the base’s lighting effect project different patterns on your desktop, and the styling tells you quickly who makes this monitor.
The input pack is typical of a G-Sync monitor. You get one each of DisplayPort 1.4 and HDMI 2.0 (for a comparison of both, see our DisplayPort vs. HDMI article). Both include HDCP 2.2 content protection. Fast refresh is merely possible through DisplayPort, and HDMI tops out at 60Hz.
The monitor also includes a high-quality cable and an external power. Even though, the panel comes with an internal fan that’s in procedure almost all of the time. For those who have a totally silent PC and a dead silent room, you may hear it if you sit very close. With even the slightest ambient noise present though, the fan is a non-factor.
No tools are necessary for assembly. Simply snap on your own lens of preference to the bottom and attach it to the already-in-place upright. The hardware is pretty solid and features exceptional construction.
From leading, you’ll never guess the PG27UQ differs from any other Asus ROG monitor. The bezel is rather wide at 20mm at the top and bottom and 16mm on the sides. The anti-glare layer is defined back somewhat and rejects reflections effectively without triggering resolution-robbing grain in the image. The picture is super-clear, gorgeous in fact, because of a good 163ppi pixel density and the amazing contrast possible when the Variable Backlight feature is on (more on that on page four).
You control the on-screen display (OSD) via three keys and a joystick, which introduces the entire OSD if pressed. The fourth button in the photography is a power toggle, and yes, you may push it accidentally sometimes. Here’s an indicator to Asus and other vendors taking this process: offer an on-screen confirmation therefore the user must press the energy key another time to carefully turn off the monitor. Many projectors do that, and it seems sensible.
Styling is slightly subdued in comparison with other ROG screens, but molded textures is there along with some nice lights. The bottom projects a pattern on your desktop, and there can be an ROG logo around back that’s also backlit. You can control the consequences in the OSD and even sync them to other ROG hardware components. There are numerous options that change colors and brightness with breathing and flashing accents. Or, you can change the whole lot off if you want. Meanwhile, the energy LED light glows white in normal mode and red when G-Sync is working.
Stand adjustments are firm and precise you need to include 4.7” inches of height, 45° swivel in each direction, 25° back tilt and 5° forward. Additionally you