Best BenQ Zowie Deals On Cyber Monday 2020

Deal Score0
Deal Score0

Features and Specifications


We first saw computer displays labeled “gaming monitors” when manufacturers achieved a trusted 144Hz refresh rate. Higher speeds reduce motion blur and invite the most recent graphics cards to flex their full potential without the 60Hz limitations of typical PC monitors. Today, there’s value offered by the 144Hz spec, like the BenQ Zowie XL2411P. Targeted at eSports enthusiasts, it includes solid gaming performance and premium construction along with excellent value.

Value is the key attraction here with XL2411P selling for $200 as of this writing. For that, you get BenQ’s high standard of construction and solid game performance.

The XL2411P includes a flicker-free backlight with a 350-nit peak brightness. Color is sRGB with a good amount of gaming modes to tailor the play experience. We were just a little surprised to find no support for AMD FreeSync or Nvidia G-Sync for fighting screen tears at fast refresh rates.

Unpacking and Accessories


Our sample arrived without the factory packing, so we can’t touch upon its security when shipped to a consumer. In conditions of assembly, the bottom and upright bolted together and snap onto the panel. To increase the upright, we pressed a tiny button release a the lock. Bundled cables include DisplayPort and IEC power.

Product 360

BenQ hasn’t been one for look-at-me styling, and the XL2411P follows that theme. It might easily be recognised incorrectly as an enterprise monitor and is obviously qualified for that purpose. One unique aspect may be the small tab on underneath right that leads an individual to the control buttons underneath. A little LED shines orange in standby mode and green when the power’s on.

The bezel is chunky by modern standards, 17mm wide throughout. The anti-glare layer is defined inside frame and competently rejects ambient light, rendering a well-saturated image free from grain or artifacts.

The square base includes a molded-in tray, which could be useful for housing stray paperclips or, perhaps, a mobile device. Sadly, there are no USB ports with which to charge said device. You will find a headphone jack on the left side though, which is something we’d prefer to see on all monitors. There are no built-in speakers, nevertheless, you do get volume control in the on-screen display (OSD).

The stand is an excellent affair with a thick upright that telescopes through a 5-inch height adjustment range. Additionally you get 45-degree swivel and 20-degree back tilt with a 90-degree portrait mode. The trunk includes a prominent cooling vent over the top with the Zowie logo displayed on the left. Inputs are next to the upright, facing down, you need to include one each of DisplayPort 1.2, HDMI 2.0 and DVI.

OSD Features


The XL2411P’s OSD will be acquainted to BenQ users using its three-box layout and organized sub-menus. Navigation is by button with five links labeled by on-screen icons.

The Picture menu has everything necessary for calibration except the picture modes, (we’ll reach those in an instant). A Black eQualizer, as BenQ spells it, adjusts shadow detail for greater visibility in dark areas. The XL2411P carries a low blue light setting, that may reduce fatigue when reading black text on white backgrounds during long work sessions. Blur Reduction engages a backlight strobe, which completely eliminates motion blur but reduces brightness by around 50%.

You can modify color temp with four presets in every picture modes except sRGB. The fourth mode has RGB sliders for a custom white point. In either FPS1 or Standard, grayscale tracking is great from the box, but color requires a little attention. If you wish to tweak gamma, there are five presets available. We found some curious behavior there (we’ll let you know more on page 3).

There are 11 picture modes total, and several of these are targeted for specific game types. Eco dials down the backlight to save lots of power, although the XL2411P manages to draw only 16.5 watts with max brightness at 200 nits. A number of the modes alter secondary colors and change the gamma for a look we weren’t keen on. Standard or FPS1 will be the best wager for an excellent image suited to all games and tasks. Once you’re done tweaking, you can save settings to 1 of three memories. That is a feature that each monitor should include. Also you can program three of the links to provide immediate access to a number of monitor functions like picture mode or Black eQualizer.

Setup and Calibration


The XL2411P measures well in either its default FPS1 or Standard modes. Gamma tracking provides blacker shadows and brighter highlights at the trouble of some detail clipping. We were not able to completely fix this problem, but after a few tweaks of the RGB sliders, we achieved excellent grayscale and color accuracy. While some fine details were hard to see using images, the picture retained good color saturation and an all natural look. See our gameplay comments below for more relating to this.

During the past, we’ve observed that high frame rates block out virtually all frame tearing, and a graphics card’s VSync feature, which syncs a game’s frame rate and the monitor’s refresh rate for fighting stuttering and screen tearing, manages the others. A 1080p display such as this one may easily run at its maximum 144Hz refresh with many mid-priced graphics cards.

Our GTX 1080 Ti pegged the frame counter in every the games we played. With VSync engaged, we never saw a frame tear, regardless of how hard we tried to create one. No matter just how much we flicked our gaming mouse during elements of Tomb Raider that featured buildings and vertical poles, there is no tearing. And do not take into account additional input lag; we noticed no difference whether VSync was on or off.

That is not to state the knowledge was flawless. Neither setting of the AMA (overdrive) could eradicate all of the motion blur, so we tried the monitor’s blur reduction feature. It functions by strobing the backlight between frames. To pay for the low brightness, we maxed the backlight, which is approximately 180 nits. This is enough light to play in a well-lit room, however the monitor looked far better when playing at night.

Interestingly, contrast and color saturation were slightly improved when blur reduction was on. This is true for static images too. We’re inclined to leave it on constantly, even when dealing with productivity apps. And it’s a rare monitor that may run its backlight strobe at 144Hz.

During dark scenes in Call of Duty: WWII, we noticed somewhat of crushed detail in the blackest shadow areas. It didn’t cause a concern with gameplay, and we didn’t feel inclined to utilize the Black eQualizer function. If you plan to play a whole lot of dark content though, you might like to tweak it up a notch or two merely to help resolve the best possible details.

Our overall gaming experience with the XL2411P was a positive one, but we’d rather see FreeSync support than be required to resort to a blur reduction feature for smooth motion. The decrease in brightness may be a concern for a few users, as it’s limited by 180 nits peak. But turning it on created a tad more color saturation, making the

We will be happy to hear your thoughts

      Leave a reply

      Blog Black Friday
      Logo
      Enable registration in settings - general