Best Seagate IronWolf Black Friday Deals 2020

Deal Score0
Deal Score0

Can you have an excessive amount of storage space? Lately, we were all carrying everything that mattered on tiny 1.44MB floppy disks, yet here we are reviewing the Seagate IronWolf 10TB internal hard disk drive.

While hard disk drive capacities of the sizes may initially seem to be excessive, there are two considerations to consider. For starters, as hard disk drive capacities have increased, so too have file sizes, and that is more likely to continue. Secondly, Seagate’s IronWolf hard disks are suitable for NAS (Network Attached Storage) devices that sit at the heart of your house or business network and store important files and irreplaceable backups from several computers.

Read more: Seagate Backup Plus Slim 2TB lightweight hard disk drive

When you’re running one of the better NAS devices, along with a sizable numbers of computers that require to store files and full backups, space for storage tends to vanish. The Seagate IronWolf is therefore not the sort of hard drive you’re more likely to just throw haphazardly right into a single desktop computer.

If 10TB still feels as though too much space, also you can get the IronWolf hard disks in 1TB, 2TB, 3TB, 4TB, 6TB and 8TB capacities aswell. The 10TB version will cost you £314 ($264, AU$469). And, if 10TB isn’t enough, Seagate is currently also supplying a 12TB drive.

Features and Specifications
As the IronWolf drive has been exclusively designed for NAS devices it includes a number of features that you wouldn’t normally find in a typical internal hard disk drive. These features permit the IronWolf to execute reliably 24/7 with huge amounts of data coming and going, all while keeping power consumption low.

It can be built in 1 to 8-bay NAS devices, and for our tests we put two IronWolf 10TB HARD DISKS right into a 2-bay QNAP TS-251A NAS drive. As you’d expect of a NAS hard disk drive, the IronWolf is optimised for RAID, and includes technology Seagate calls ‘AgileArray’, featuring rotational vibration sensors which reduce vibration in multi-drive NAS devices. Error recovery control – essential if you are trusting the IronWolf drive with irreplaceable documents – and advanced power management to keep running costs low are also headline features.

Seagate states it could handle a workload of 180TB a year, which is fairly a respectable amount for small to mid-sized businesses. If you’re thinking about using this drive in your NAS in the home, then it’s unlikely you will be moving that much data to and from the IronWolf.

Other specifications include SATA 6GB/s interface, a max sustained data transfer rate of 210MB/s for the 10TB and 8TB drives (195MB/s for 6TB, 180MB/s for the 4TB, 3TB, 2TB and 1TB drives) and a spindle speed of 7200 RPM for the 10TB, 8TB and 6TB drives (the other capacities put up with 5900RPM), and has 256MB of cache.

Portion of the reason Seagate has had the opportunity to cram 10TB of storage in to the IronWolf’s chassis is basically because it uses seven PMR (Perpendicular Magnetic Recording) discs, in addition to using helium to permit for thinner platters. Helium is less dense than air, which reduces the drag force functioning on the spinning discs.

Performance
So, the specs paint this as a fairly robust and reliable hard disk drive, but how does it perform? While we can not put its 180TB a year promise to the test, we ran numerous industry recognised benchmarks to observe how the drive copes under great pressure.

We ran these benchmarks with the IronWolf 10TB hard disk drive linked right to our test computer via SATA. In the CrystalDiskMark benchmark test we saw sequential read speeds of 250.2 MB/s and write speeds of 229.2 MB/s, which are incredibly impressive, considering that is a 7200RPM hard disk drive, and handily beats the Seagate Enterprise Capacity 3.5 HDD V.4 6TB HARD DISK DRIVE, which reached 213MB/s read and 212MB/s write speeds in the same test.

Inside our Atto disk benchmark tests, which check the speeds of the hard disk drive when transferring files of varied sizes, the IronWolf 10TB again provided fast speeds which were pretty consistent, of around 249MB/s read and 220MB/s write.

Finally we ran PCMark benchmarks, which gave a score of 2969, which puts it before a lot of its competitors, though behind the Seagate Enterprise Capacity 3.5 HDD V.4 6TB Hard Disk’s score of 3727.

While we didn’t have the gear to check the sound levels in a handled environment, the IronWolf remained pretty quiet. Actually, the only time we’re able to hear much noise from it had been whenever we installed two of these in the QNAP TS-251A NAS box, formatted them and installed the NAS software.

It’s quite understandable for there to be noise when performing intensive tasks like this, as soon as installed the drives settled down and became all-but silent. Assuming you have your NAS at home office or living room (the QNAP TS-251A is a NAS that specialises in being truly a media server and video transcoder), then it is rather unlikely you will be bothered by the noise of the IronWolf when {u

We will be happy to hear your thoughts

      Leave a reply

      Blog Black Friday
      Logo
      Enable registration in settings - general