Best Dewalt Grinder Black Friday & Cyber Monday Deals 2022

DeWalt did it yet again of their 20v MAX line. The DCG413B gives to any user that can be used to a corded grinder, without the trouble of a cord. The construction, performance, ergonomics, and overall fit and finish is impressive for an extremely low cost compared to its competitors.

Top Listing

As somebody who knows a lot of blacksmiths and welders, I’d say that over 75% of these have a DeWalt grinder within their starting lineup. Granted, they are mostly corded grinders, but DeWalt has gotten it right with their angle grinders in comparison to other tool manufacturers. Just as before, they grind their way towards leading and hit the mark with the DeWalt Cordless Angle Grinder Review.

Get Huge Discount on Dewalt Grinder in Amazon (Black Friday & Cyber Monday Sales + Deals)

  • DEWALT DCG413B 20V MAX Brushless Cut Off Tool/Grinder (Tool Only)  – Check Price at Amazon
  • DEWALT Angle Grinder Tool, Paddle Switch, 4-1/2-Inch, 11-Amp (DWE402) – Check Price at Amazon
  • DEWALT 20V MAX XR Angle Grinder with Kickback Brake, Slide Switch, 4-1/2-Inch, Tool Only  – Check Price at Amazon
  • DEWALT FLEXVOLT 60V MAX Angle Grinder with Kickback Brake, 4-1/2-Inch to 6-Inch, Tool Only  – Check Price at Amazon
  • DEWALT Angle Grinder Tool, 4-1/2-Inch to 6-Inch, Trigger Switch (DWE43116)  – Check Price at Amazon

Compare Price in More Stores like Walmart, BestBuy, Target, NewEgg, etc

DeWalt Cordless Angle Grinder Review Overview
In an selection of cordless angle grinders, just a few stand out because of the nature of the tool. The angle grinder, at its core, can be an powerful tool. One for slicing through very difficult materials like concrete and steel. To get this done, it needs substantial power and high-performance motors. In addition, it takes a rugged design that plans for the longevity useful in rough environments. Along with most of these factors, safety is key. The angle grinder may become an extremely dangerous tool if misused or defective. Taking all this into consideration when coming up with a decision on a cordless grinder is very important to householders and professionals alike.

After using the DeWalt, I definitely enjoy it. Admittedly, apart from my weird obsession with drill/drivers, angle grinders are my “favorite tool.” But to be completely candid, for someone like myself would you a big most work from a home shop, it’s hard to displace a corded grinder. Alternatively, the pesky cord is an enormous annoyance if you ask me and a safety concern. With that said, to any extent further, I’ll leave the corded grinder in the cabinet for when I need it. The cordless tool has just as before won me over, especially because the DeWalt has some very nice features and tremendous construction.

DeWalt Cordless Angle Grinder Review Features

Honestly, on the grinders’ I had growing up when understanding how to weld, there have been no guards. Recently, my corded grinder is absent of 1 as well because it had perished after a difficult drop. This DeWalt has the one which will stay on! The robust type 27 steel guard is adjustable and locks to whatever position you wish. Having the capacity to direct your sparks and residual chips is important, which guard does an excellent job. Also, this model sports a 4.5in wheel, the overall standard that is exquisite for nearly every application. Additionally this grinder runs on DeWalts 20V battery platform.

As I mentioned previously, angle grinders could be dangerous to operate. In the event of a major accident you certainly want the cutting wheel to avoid as quickly as possible, instead of wind down. To do this, you will find a brake feature in the tool. Now, don’t confuse this with a genuine device braking the rotation of the business enterprise end. Instead, via the motor, all current Is cut, and the gears stop within 2 seconds or less. This happens during any binding, pinching, or stalling occurs.

The Best Amazon Black Friday & Cyber Monday Offers, Sales, Deals

  • Product
  • Features
  • Photos

DEWALT 20V MAX* Angle Grinder Tool, Tool Only (DCG413B)

& Free shipping
Last update was on: October 5, 2022 9:57 am
$156.99 $229.00
  • Product
  • Features
  • Photos

DEWALT FLEXVOLT ADVANTAGE 20V MAX* Angle Grinder, Paddle Switch, 4-1/2-Inch to 5-Inch,...

Last update was on: October 5, 2022 9:57 am
  • Product
  • Features
  • Photos

DEWALT Angle Grinder, One-Touch Guard, 4-1/2 -Inch (DWE4011)

& Free shipping
Last update was on: October 5, 2022 9:57 am

Get Upto 70% Off Here

The brushless motor on the DeWalt turns at a nicely paced 9000 RPM under no load. Sure to become more than enough juice for just about any project. To find out more on brushed and brushless motors, make certain to look at this recent article that explores their key differences.

The two-stage trigger is a wonderful best practice that is incorporated in to the tool. Prior to the paddle could be depressed, another small trigger should be activated. This reduces the chance of accidental activation.

The overall tool construction is quite done well. The tool shell comprises a material that we’ve discussed previously and will be found within What Your Tools ARE CONSTRUCTED WITH. The PA66 30% glass fiber reinforced plastic is strong, impact resistant, and sturdy. The tool shell was also well molded, and was very simple to snap back together after looking beneath the hood.

Furthermore, I was pleased to see a lot of parts either machined or fired up a lathe through the entire tool, a clear sign of quality.

The butylene rubber overmold is performed quite nicely, with dovetail molding in to the tool shell. The material is normally grippy, which overmold is fairly thick as well.

Grinding is messy, and DeWalt did a fairly good job of minimizing the ingress of dust in to the internals. Importantly, while still allowing ventilation of the motors. That is achieved by some mesh vents installed near to the rear of the tool. The mesh looks to be well suited for the micron size connected with metal and concrete grinding and is secured to the tool shell, instead of being the main mold. I suspect that is to permit some cleaning of the mesh. If so, congrats on DeWalt for the look!

As for all of those other tool, no unnecessary holes can be found, and the trigger surprisingly includes a boot to avoid debris from traveling in to the switch. Overall, DeWalt did an excellent job of reducing debris creeping in to the tool.

As with almost every other quality angle grinders, usage of the gearbox is pretty easy with removing the gearbox shroud.

Once inside main housing, the gears turn to be of top quality, and liberally lubricated with the water-resistant, lithium-based molybdenum disulfide grease. If in the case your gears ever degrade or become damaged, replacing the drive gear, and accompanying spiral pinion gear is quite easy. This is for this reason smart design with quick access to the gearbox.

DeWalt Cordless Angle Grinder Review Performance
I must say i took my amount of time in the testing, teardown, and during actual projects with this grinder and I’m flat out impressed. Angle grinders have a beating and should be produced because of this, accordingly. The DeWalt just flat out delivers.

When cutting and grinding carbon steel for knife making blanks, I zipped through a rough cutout in only seconds, then switched discs and commenced some very effective grinding.

The same could be said for concrete. I tested on several bricks and drained my battery while seeing how effective the tool was against among the toughest challenges for grinders. Lastly, for an instrument restoration, I’m focusing on, I could quickly and elegantly reface an old-fashioned masonry hammer. Overall, through everything, the DeWalt was effective and ergonomic. Obviously, this is best paired with their 20v MAX 5mAh battery!

DeWalt Cordless Angle Grinder Review Value

Having quality tools that handle tough jobs with metal and concrete is important, rather than a destination to skimp. And as stated above, build quality ought to be on par with price, since these tools will be taking quite the beating. The DCG413B can be an example of extreme construction and reliability your money can buy. You can grab the bare tool at THE HOUSE Depot for $169.00, an excellent price for an instrument which will certainly last you a long time.

DeWalt Cordless Angle Grinder Review SUMMARY

After an extended span of convinced that corded grinders were the only method to go – I’m turned! This DeWalt proved in that short time frame that quality, price, and reliability can culminate together! In occasions when corners are cut for cost benefits and income by many competitors, DeWalt has tested again to become a front-runner, the DCH413

DEWALT 20V MAX* Angle Grinder Tool, Tool Only (DCG413B)

 in stock
26 new from $156.99
1 used from $179.00
Free shipping
as of October 5, 2022 9:57 am


  • Brushless motor of the angle grinder requires no brush changes.
  • DEWALT grinder's brake stops wheel in 2 seconds or less on average
  • Kickback Brake engages when a pinch, stall, or bind-up event is sensed and the electronic brake engages with maximum force to quickly stop the wheel, reduce the movement of the metal grinder and shut the grinder off.
  • Features E-Switch Protection - When the ON/OFF trigger switch has a no-volt release function. In the event of a power outage or other unexpected shut down, the trigger switch will need to be cycled (turned off and then on) to restart tool.
  • Two stage trigger requires two actions to activate tool.

DEWALT FLEXVOLT ADVANTAGE 20V MAX* Angle Grinder, Paddle Switch, 4-1/2-Inch to 5-Inch, Tool Only (DCG416B)

$227.99  in stock
8 new from $219.54
as of October 5, 2022 9:57 am


  • Angle grinder gets up to 54% more power when paired with FLEXVOLT batteries
  • Kickback Brake of DEWALT angle grinder engages with maximum force to quickly stop the wheel and shut off the grinder when a bind-up occurs.
  • E-CLUTCH shuts down the motor of DEWALT angle grinder in under a tenth of a second when a pinch/stall is detected
  • Compatible with all DEWALT 20V MAX* and FLEXVOLT Batteries
  • E-Switch Protection requires the trigger switch to be cycled (turned off and on) in the event of a power outage or other unexpected shutdowns to restart

DEWALT Angle Grinder, One-Touch Guard, 4-1/2 -Inch (DWE4011)

$69.00  in stock
11 new from $69.00
5 used from $66.24
Free shipping
as of October 5, 2022 9:57 am


  • 7 amp AC/DC, 12,000 rpm motor of the angle grinder is designed for faster material removal and higher overload protection
  • One-Touch guard of the metal grinder eliminates the need for a tool to adjust the guard location.
  • Hex wrench replaces spanner wrench of DEWALT angle grinder - hex wrench can be found in most tool boxes
  • Quick-Change wheel release allows tool-free wheel removal without the need for a wrench
  • 2-position removable side handle provides increased comfort and control
Blog Black Friday
Enable registration in settings - general