Get JBL Pulse 3 Speaker On Black Friday 2020 Deals

Deal Score0
Deal Score0

JBL launched around two dozen new audio tracks products in India in regards to a month ago, a lot of which we first saw unveiled as of this year’s CES. We recently reviewed the Flip 4 that was a compact lightweight speaker, and today, we’ve the Pulse 3 which may be the third version of JBL’s popular speaker with built-in lights.

With the 3rd iteration of the Pulse, we finally get proper waterproofing and better drivers for better sound. With a cost tag of Rs. 15,999, the Pulse 3 competes directly with Sony’s SRS-XB40, which also offers a light show feature of its. Let’s see if you should think about this one instead.

JBL Pulse 3 design and features

The first Pulse speaker had a somewhat crude design and was quite average regarding sound quality, taking into consideration the focus was on the LED light effects. The Pulse 2 refined the look with a finer weave for the wire mesh, which managed to get look more elegant. Now, the Pulse 3 did away with wire mesh completely, and instead, only the low thirty percent of the speaker is fabric-covered, as the rest can be an acrylic covering for the built-in lights.

The speaker is approximately how big is a 750ml water bottle, and it sort of appears like one too. There are two exposed passive radiators at either end of the speaker, which vibrate to create better bass. However, because of the insufficient any protective covering, it is possible to damage these if you aren’t careful. Because the Pulse 3 is built to stand upright, underneath radiator was blocked when located on any non-flat surface, for instance a mattress. You may use the Pulse 3 horizontally nonetheless it will roll around, in order that isn’t really recommended.

The ports and buttons are located around the trunk. There’s a power button accompanied by status LEDs which demonstrate the charge level, and in addition play/ pause and volume buttons. The Bluetooth button enables you to start the pairing process, the Connect+ button enables you to pair multiple Pulse 3 speakers, and there’s a dedicated button to improve the light patterns. The playback control and the Connect+ buttons aren’t backlit however the rest are.

Similar to the Flip 4, the battery status LEDs only light when you press the buttons at the trunk. The Pulse 3 uses its lights showing you the quantity level, which is clever. All the customisations, including adjusting the brightness of the lights, should be done through the JBL Connect app. Gleam rubber flap to safeguard the 3.5mm music input and Micro-USB charging port.

In conditions of specifications, the Pulse 3 uses Bluetooth 4.2 but doesn’t support any advanced codecs such as for example aptX and AAC. There is no easy connectivity option like NFC either. There are three 40mm full-range drivers, which feature a complete output power of 20W. Frequency response is in the number of 65Hz-20,000Hz and there’s a non-removable 6000mAh battery inside. The speaker is pretty heavy at 960g, but that’s still quite somewhat lighter than Sony’s XB40.

The JBL Connect software for Android and iOS enables you to link multiple speakers (the business says that greater than a 100 could be synced) or you could utilize two of these in a stereo configuration. The iphone app also lets you modify the brightness of the lights and change the function of the Play button, to either play/ pause music or even to summon your phone’s voice assistant (either Siri or Google Assitant). Also you can utilize the Pulse 3 as a speakerphone, since it includes a built-in mic.

Tapping the speaker icon enables you to customise the lights. You can decide on Jet, Fireworks, Equaliser, Rave, Rainbow, Campfire, and Wave. You can set a custom pattern too, however the presets look far better. The colours can even be changed using an RGB pallette, or you can also use your phone’s camera to complement the colours around you.

JBL Pulse 3 performance and battery life

The JBL Pulse 3 can have two active connections at the same time, so two persons may take turns playing music. Playing a track from the next phone immediately stops the currently playing track. The light show changes according to the beat of the music, and colours keep cycling through your selected palette. The light show could be powered down by holding down the corresponding button on the speaker. Similar to the JBL Flip 4, you can transform the function of the Play button to activate your phone’s va, but this disables the play/ pause function, which isn’t practical. Also, once you have two phones with virtual assistants linked and try to utilize the shortcut button, nothing happens, because the speaker isn’t sure which to engage.

We just like the 360-degree sound made by the Pulse 3. You can stick it pretty much any place in your room and be prepared to hear it sufficiently, as sound reflects off local surfaces. Voice calls are also handled decently well although you need to be near the speaker for the individual on the other end in order to hear you clearly. We missed much of a notable difference in audio tracks quality when by using a wired connection instead of Bluetooth.

The Pulse 3 will get really loud, which is pretty impressive given it’s relatively sleek design. The radiators work furiously when hearing bass-heavy tracks, although the bass commences to get drowned out somewhat above the 90 percent volume level. At low volumes, the bass lacks kick but this computes well for several electronic tracks such as for example Medicine Man by Zero 7. Vocals are crisp and the sonic signature is warm, however the mid-range is a lttle bit lacking. That is also noticeable in other music genres like pop and rock. In Feel It Still by Portugal. THE PERSON, the Pulse 3 produces punchy bass but instrument separation isn’t very good. Vocal-led tracks such as for example Wind of Change by the Scorpions do far better, so if this is actually the sort of you music you will be listening to a whole lot then your Pulse 3 should keep you happy.

The battery is rated to provide 12 hours of playback time. With the bundled charger, it requires about four and half hours to totally charge the battery, which is a lttle bit longer that we want. We played music on the Pulse 3 with the quantity set to 50-60 percent almost all of enough time, took a few calls, and had the lights set with their maximum brightness level, and we could actually get about 10.5 hours of playback time. That’s not bad, considering it must power the LEDs, but also for a speaker this size, we’d have liked better battery life.


The JBL Pulse 3 costs Rs. 15,999, which is somewhat expensive considering its average performance in the mid-range. On the plus side, the speaker does get pretty loud, is IPX7 rated, and includes a fun light show feature. Battery life is decent but certainly might have been a lot better. If you are looking for something with serious audio tracks performance and incredibly good battery life, then there’s the Sony’s SRS-XB40. It weighs more, but it’s rugged and will be offering better features such as for example LDAC and NFC, and additionally, it may placed on a light show on top of that.


  • IPX7 waterproofing
  • Light show looks cool
  • Strong bass and vocal performance


  • Exposed radiators
  • Average battery life
  • Muddy mid-range
  • A bit expensive

We will be happy to hear your thoughts

      Leave a reply

      Blog Black Friday
      Enable registration in settings - general